![background image](http://html1.mh-extra.com/html/ge/az45e07ea-series/az45e07ea-series_technical-service-manual_4683517036.webp)
– 36 –
Remove six screws to remove the end cap to access
the bearing assembly. Two screws are used to
secure the bracket attached to the indoor coil and
end cap.
(QG&DSDQG,QGRRU)DQ%ORZHU%HDULQJ
(QG&DSDQG,QGRRU)DQ%ORZHU%HDULQJ
Components
Proper Bearing Placement
NOTE: When reinstalling bearing, ensure the shaft
goes directly into the bearing assembly. The above
image shows proper placement of bearing. Failure
to install properly will result in a noise complaint.