CALL
The CALL LED (red) indicates status of the audio information
transmitted to the central station.
Table 3: CALL LED status
Duty cycle
Rate (±10%)
Description
100% —
Connected
0% —
Offline
10% 1
s
Connecting
50% 1
s
Ringing
present
RSSI
The RSSI LED (green) indicates the field strength or signal strength
found by the GSM module. The number of flashes indicates the
level.
Table 4: RSSI LED status
Flashes Description
Off
No field strength (no network detected).
1 to 4
Field strength indication from poor (1) to excellent (4).
NET
The NET LED (green) indicates the status of the network. The
meaning of the number of flashes is indicated in the table below.
Table 5: NET LED status
Flashes Description
Off Not
registered
On
Registered to home network
1
Registered to roaming network
2 Searching
network
3 Denied
4 Unknown
PSUE
The PSUE LED (red) indicates the status of the power supply.
Table 6: PSUE LED status
State Description
Off
Power supply okay
On
No battery connected, or other power supply problem
GPRS
For future use.
SIME
The SIME LED (red) indicates the status of the SIM card. The
meaning of the number of flashes is indicated in the table below.
Table 7: SIME LED status
Flashes Description
Off Ready
1 PIN
error
2 PUK
error
3 PIN
2
error
Flashes Description
4 PUK
2
error
5 SIM
blocked
from
network
On SIM
not
present
Specifications
Power supply:
Via ribbon cable from control panel 10 to 15 V
Via CON1, from backup battery
10 to 15 V
Current consumption (at 13.8 V
±5%):
MI
bus
20
mA
GSM online via battery leads
20 mA
GSM online max. via battery leads
0.3 A
Dimensions
104 x 50 mm
Battery type and max. capacity
Lead acid rechargeable
18 Ah 12 V nom. (BS131)
Weight 44
g
Temperature 0
to
50°C
Relative humidity
Max 95% noncondensing
Regulatory information
Certification
European Union
directives
1999/5/EC (R&TTE directive): Hereby, GE Security
declares that this device is in compliance with the
essential requirements and other relevant provisions
of Directive 1999/5/EC.
2002/96/EC (WEEE directive): Products marked with
this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more
information see: www.recyclethis.info.
2004/108/EC (EMC directive): Non-European
manufacturers must designate an authorized
representative in the Community. Our authorized
manufacturing representative is:
GE Security B.V., Kelvinstraat 7,
6003 DH Weert, The Netherlands.
This product was tested and certified to EN 50136-1
and EN 50136-2 for Alarm transmission system
performance ATS 2 (D2, M2, T3, S1, I0).
Contact information
For contact information see our Web site: www.gesecurity.eu.
DA: Installations vejledning
Indledning
ATS7310 giver mulighed for alarm transmission via GSM på
følgende ATS centraler:
•
ATS Advisor Master: ATS2000, 3000 og 4000 serie
•
ATS Advisor Advanced (ATS-Alarm): ATS1000A serie
4 of 30
P/N 146376999-3 • REV 3.0 • ISS 29OCT09
