26
6.3.5
OPERATOR NO 2 ASSIGNMENT FOR AUTO ATTENDANT MODE
Format:
*
2 6 abc #
abc = extension number (Default setting = Ext. 803)
Description: Assign an extension to be Operator No 2 for Auto Attendant Mode. The incoming
call will be auto transferred to Operator No. 2 if Operator No. 1 is busy.
Example: Assign extension 806 to be Operator No. 2.
•
If both Operators are busy, then the line will auto search from extension 802-808.
The next idle extension will ring. Pick up the extension to answer the call.
•
If the incoming call cannot be auto transferred because all extensions are busy, then
the external caller will hear busy tone.
6.4
EXTERNAL DIALING MODE
6.4.1
EXTERNAL DIALING MODE ASSIGNMENT
Format:
*
8 abc n #
abc = extension number
n = 0 = access to CO line by dialing 9 or by pressing the <FLASH KEY> or by tapping
the Hook Switch
n = 1 = direct access to CO line
Description: An extension can be programmed to have access to the external CO line
1.) By dialing 9 first or by pressing the <FLASH KEY> or by tapping the Hook Switch
(n=0).
2.) By direct access (n=1).
Example: Assign extension 803 to have direct access to external CO line 1
•
You
should
dial
*
first to make an internal call when the extension is in Direct
External Dialing Mode
•
The default setting is to have access to the external CO line by dialing 9 or by
pressing the <FLASH KEY> or by tapping the Hook Switch
