10
4.1
IMPORTANT INSTALLATION INFORMATION
•
Never install telephone wires during an electrical storm (thunder and lighting)
•
Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations
•
Never touch un-insulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface
•
Use caution when installing or modifying telephone lines
4.2
PRODUCT INSTALLATION RECOMMENDATIONS
Caution: The Power Plug should be installed in a socket outlet which is close to the equipment
and easily accessible
The following places are not recommended for product installation:
•
Avoid places where shock or vibration are present
•
Avoid dusty places
•
Avoid places where water or oil may come into contact with the product.
•
Avoid places near high-frequency generating devices such as micro wave ovens,
sewing machines or electric welders
•
Avoid places within 2 metres of television sets
•
Avoid places where the environment is hot and where there is no air movement.
4.2.1 INSTALLATION
OPTIONS
This product is designed for wall mounting or for sitting on a shelf.
If the unit is going to be wall mounted, you must drill two holes into the wall, 50mm deep and
160mm apart. After inserting two wall plugs of the correct diameter into the wall, you can screw
two screws into the two wall plugs. The unit can then be mounted on the wall.
