GE AquaTrans AT600, User Manual

Page: 46 / 216

Chapter 4. Initial Setup and Programming
34 AquaTrans™ AT600 User’s Manual
4.3.1 Changing Display for One- or Two-Variable Screens (cont.)
4.3.2 Changing the Measurement Type for One- or Two-Variable Screens
To change the measurement type:
Note:
To select a particular measurement unit, go to “Units Setting” on page 44 .
Use the [

] and [

] keys to scroll to the desired value. (Available
options include 0, 1, 2, 3, 4, and Sci (Scientific Notation). Press [

] t
o
select the value, and then press [

] again to confirm the selection or
[

]
t
o cancel the selection.
From the display screen, press either the [

] or [

] keys until the
measurement type is highlighted.
After the value is highlighted, press
[

] to open the Measurement Type
option.
The screen changes to
Display/Measurement Type. Press the [

] and [

]
keys to scroll to the desired parameter. Available parameters include:
Velocity, Act Volumetric, Std volumetric, Mass, Batch Totals, Inventory
Totals, Soundspeed, Reynolds, KFactor, and Diagnostics. After you have
chosen the measurement type, press
[

] t
o select the value, and then
press [

] again to confirm the selection or
[

] t
o cancel the selection.
Display/Decimal
2
3
4
Sci
Velocity
m/s
0.0
m/s
Velocity
0.000e+00
Velocity
Measurement Type
Act Volumetric
Std Volumetric
Mass