Problem
Possible Causes
What To Do
Display goes blank
A fuse in your home may be
•
Replace the fuse or reset the circuit breaker.
(on some models)
blown or the circuit breaker
tripped.
The clock is turned off so that it
•
See the
Using the clock and timer
section.
does not show in the display.
Display flashes
Power failure.
•
Reset the clock.
(on some models)
Unable to get the
oven control pads were
•
The
Bake
and
Broil Hi/Lo
pads must be touched at
display to show “SF”
not touched properly.
the same time and held for 3 seconds.
(on some models)
Power outage,
Power outage or surge.
•
Reset the clock. If the oven was in use, you must reset
clock flashes
it by touching the
Clear/Off
pad, setting the clock and
(on some models)
resetting any cooking function.
“Burning” or “oily” odor
This is normal in a new oven
•
To speed the process, set a self-clean cycle for a
emitting from the vent
and will disappear in time.
minimum of 3 hours. See the
Using the self-cleaning
oven
section.
Strong odor
An odor from the insulation
•
This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise
A cooling fan may automatically
•
This is normal. The cooling fan will turn off and on.
turn on and off to cool
internal parts.
Drawer does not slide
The drawer is out of alignment.
•
Fully extend the drawer and push it all the way in.
smoothly or drags
See the
Care and cleaning of the range
section.
Drawer is overloaded or load
•
Reduce weight. Redistribute drawer contents.
is unbalanced.
48
Before you call for service…
Troubleshooting Tips
O
pe
ra
tin
g
In
st
ru
ct
io
ns
Sa
fe
ty
In
st
ru
ct
io
ns
Ca
re
a
nd
C
le
an
in
g
In
st
al
la
tio
n
In
st
ru
ct
io
ns
Tr
ou
bl
es
ho
ot
in
g
Ti
ps
Co
ns
um
er
S
up
po
rt
