9
GEAppliances.com
Use a flat-bottomed wok.
Top-of-Range Cookware
Aluminum:
Medium-weight cookware
is recommended because it heats quickly
and evenly. Most foods brown evenly in
an aluminum skillet. Use saucepans with
tight-fitting lids when cooking with minimum
amounts of water.
Cast-Iron:
If heated slowly, most skillets
will give satisfactory results.
Enamelware:
Under some conditions,
the enamel of some cookware may melt.
Follow cookware manufacturer’s
recommendations for cooking methods.
Glass:
There are two types of glass
cookware—those for oven use only and those
for top-of-range cooking (saucepans, coffee
and teapots). Glass conducts heat very slowly.
Heatproof Glass-Ceramic:
Can be used for
either surface or oven cooking. It conducts
heat very slowly and cools very slowly. Check
cookware manufacturer’s directions to be
sure it can be used on gas ranges.
Stainless Steel:
This metal alone has poor
heating properties and is usually combined
with copper, aluminum or other metals for
improved heat distribution. Combination
metal skillets usually work satisfactorily
if they are used with medium heat
as the manufacturer recommends.
Stove Top Grills
(on models with sealed burners)
Do not use stove top grills on your sealed gas
burners. If you use the stove top grill on the
sealed gas burner, it will cause incomplete
combustion and can result in exposure to
carbon monoxide levels above allowable
current standards.
This can be hazardous to your health.
Wok This Way
(on models with sealed burners)
We recommend that you use a 14
″
or smaller
flat-bottomed wok. Make sure the wok bottom
sits flat on the grate. They are available at your
local retail store.
Only a flat-bottomed wok should be used.
Do not use a flat-bottomed wok on a support
ring. Placing the ring over the burner or grate
may cause the burner to work improperly,
resulting in carbon monoxide levels above
allowable standards. This could be dangerous
to your health.
In Case of Power Failure
In case of a power failure, you can light
the gas surface burners on your range with
a match. Hold a lit match to the burner,
then push in and turn the control knob
to the
LITE
position. Use extreme caution
when lighting burners this way.
Surface burners in use when an electrical
power failure occurs will continue to operate
normally.
O
pe
ra
tin
g
In
str
uc
tio
ns
Ca
re
a
nd
C
lea
nin
g
In
sta
lla
tio
n
In
str
uc
tio
ns
Tro
ub
les
ho
ot
in
g
Tip
s
Sa
fe
ty
In
str
uc
tio
ns
Co
ns
um
er
S
up
po
rt
