manualshive.com logo in svg

GE Appliances DVM1950, Technical Service Manual

Share
Download
GE Appliances DVM1950 Technical Service Manual Download Page 28

– 28 –

Smart Board

To remove the smart board:

1.  Remove the control panel assembly.                

(See 

Control Panel Assembly

.)

2.  Remove the 7 connectors from the smart board

3.  Remove the 2 relay connectors.

4.  Disconnect the touch panel ribbon by pulling up 

on the connector locking clip and removing the 
ribbon from the connector. 

5.  Remove the 3 Phillips-head screws that attach 

the smart board to the control board frame, 
then lift the smart board off the frame.

Ribbon Connector

2.  Remove the two T-20 Torx screws that attach 

the door switch bracket to the microwave oven 
frame and remove the door switch mounting 
block.

3.  Using a small, 

fl

 at blade screwdriver, gently lift 

the tab enough to remove the door interlock 
switches from the door switch mounting block.

Disconnect

Disconnect

Disconnect

Monitor Switch

Door Sensing Switch

Disconnect

Primary Interlock Switch

Tab

Tab

Door Switch Mounting Block

To remove the door interlock switches:

1.  Disconnect wiring to the door switches.

Summary of Contents for Appliances DVM1950

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands