manualshive.com logo in svg

GE Appliances DVM1950, Technical Service Manual

Share
Download
GE Appliances DVM1950 Technical Service Manual Download Page 24

– 24 –

Stirrer Assembly

The stirrer assembly consists of a blade, pin, and 
cover. The blade is air driven and rotates on a shaft 
embedded in the stirrer cover. The stirrer assembly 
is located at the top of the oven cavity.

To remove the stirrer assembly:

1.  Disconnect power from the microwave oven and 

open the door.

2.  Gently pry up on the plastic retainer using a 

small, 

fl

 at blade screwdriver and remove. Turn 

the stirrer cover counterclockwise to open. The 
stirrer assembly will then drop down. To reinstall, 
place in position and turn clockwise to lock in 
place. 

Stirrer Assembly

Retainer

Power Saver Battery

The rechargeable power saver battery is mounted 
in a plastic holder that is mounted to the grille, just 
above the control panel assembly. (See 

Control 

Panel Assembly

.)

The power saver battery is connected to the smart 
board at CN901.

The power saver battery snaps into the plastic 
holder, which, in turn, snaps onto the grille.

The power saver battery output is approximately 2.5 
VDC.

Holder

Battery

Summary of Contents for Appliances DVM1950

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands