– 73 –
Failure
Code
Meaning
Correction
-F0-
CLEAR/OFF key input
failure
Short for approximately 100 seconds.
-F1-
Control Failure
Loss of element relay redundant driver protection.
-F2-
Oven temperature
condition due to sensor
input to control
Oven above 640°F with Lock input untrue. Oven above 915°F with
Lock input true.
-F3-
Open Sensor
Sensor is 2900 to infi nite ohms while in a heating mode.
-F4-
Shorted Sensor
Sensor is 0 to 950 ohms maximum while in a heating mode.
-F6-
Failed GAs Valve Lockout
Open harness switch and/or installed gas lockout motor.
-F7-
Shorted key detection
except for slew entry and
Clear/Off keys
Short for approximately 40 seconds.
-F9-
door lock false while
above Runaway Setpoint,
unlatched Door Lock
temperature or FAD
device setpoint exceeded.
"Unlock" Latch Changing status to "Lock." Latch of Motor changing to
"Un-Lock" while above run away set point.
FC
Door Latch error
Unlock home and lock home are try simultaneously.
FD
Probe failure
Shorted Probe
FF
Control failure
Loss of door motor redundant driver protection.
Electronic Range Control (ERC) Failure Codes
The oven may stop operating and not give an F code on the display immediately. F codes are stored in
nonvolatile eprom memory until the same fault occurs twice consecutively. When that occurs, the F code
will be displayed on the ERC. F codes can be recalled by pressing KITCHEN TIMER ON/OFF, CLOCK, and 9
simultaneously. While the F code is displayed, press 8 and 6 simultaneously to clear them.
