– 63 –
4. Remove the two 1/4-in. hex-head screws that
hold the sensor to the rear wall of the oven
cavity.
Temperature Sensor
The temperature sensor is used on all single ovens
and the lower cavity on double ovens.
On Café models, the resistance of the temperature
sensor can be checked from the rear of the range
after the rear cover has been removed. (See
Rear
Cover
.)
On Profi le and GE models, the resistance of the
temperature sensor can be checked at the ERC.
Place the control panel in the service position.
(See
Touch Panel and Electronic Range Control (ERC)
.)
Disconnect the wire harness from location CN2. On
the wire harness connector, test between the pin at
location 6 and the pin at location 8.
The temperature sensor has an approximate
resistance value of:
• 1100
at room temperature
• 1650
at 350°F (177°C)
• 2650
at clean temperature
To remove the temperature sensor:
1. Remove the oven door. (See
Oven Door Removal
.)
2. Remove the rear cover. (See
Rear Cover
.)
3. Disconnect the sensor wire harness. Note the
location of the sensor wiring entry hole.
5. Gently pull the sensor wire harness into the
oven.
Notes:
1. When installing the temperature sensor, use a
small fl at blade screwdriver to push and guide
the sensor wire harness into the oven liner.
2. Ensure displaced insulation around the wiring
entry hole is returned to its original position.
Entry Hole
Sensor Wire Harness