GE APCD06 Series, Owner'S Manual And Installation Instructions

Page: 9 / 32

49-5000135
9
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
1. Unpack the Air Conditioner
WARNING
Excessive Weight Hazard
• Use two or more people to move and install air
conditioner.
• Failure to do so can result in back or other injury.
• Remove packaging materials. Save the carton
and the foam packaging for storing the air
conditioner when not in use.
NOTE : There are NO packing materials inside the
air conditioner to remove—Do Not open the cabinet.
• Properly dispose of/recycle all packing material.
• Handle the air conditioner gently.
• Keep the air conditioner upright and level. Do not
set the air conditioner on its side, front, back or
upside down.
2.
Install Exhaust Nozzle to Main
Window Panel
1. Hold the main window panel so that the L-shaped
edges of the panel are facing you.
A
A
L-Shaped
Edges
2. Align the exhaust nozzle with the slots in the
opening, and then insert and slide the nozzle to
access the hole from the back of the main window
panel.
A
B
A Main
Window
Panel
B
Exhaust
Nozzle (1 or
2 depending
on model)
3. Turn the main window panel over, so that the
nozzle is away from you. Insert a flat screw
through the hole to fasten the window panel to the
adapter.
NOTE: On a dual hose unit, install the smaller hose
nozzle to the left-hand hole in the panel.
A
A Flat
Screw
3.
Install Main Window Panel and
Extension Panels
NOTE : Depending on the size of your window
opening, use the main panel and one or both of the
extension panels.
1. Open the window and place the main window
panel into the window.
NOTE : The window assembly is designed to
accommodate either a vertical slide or horizontal
slide window.
Vertical Slide Window:
A
A Main Window Panel
Horizontal Slide Window:
A Main Window Panel
A
2. Adjust the extension panel(s) to the width or
height of the window as shown.
NOTE : Some window installations may require
the extension panels to be trimmed.
3. Depending on the number of extension panels
used, use two or four flat screws to secure the
extension panel(s) to the main panel. Install from
the back.
NOTE : There are many window types on the
market today. Use the foam strips and brackets
(provided) to secure the extension panels that will
fit the window opening.
4. For vinyl windows only. Skip to step 6 for wood
windows. Place the two top window brackets and
two bottom window brackets where they will best
support the extension panels.
Before assembly: USE ONLY FOR VINYL
A Top Window Brackets
B Bottom Window Brackets
A
B
A
B