49-5000085
5
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
NOTE:
The display
always shows the room
temperature except
when setting the Set
temperature or the Delay
timer.
Remote Control
NOTE:
The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree
Celcius (°C), press the Temp In and Temp Decrease
–
buttons together and hold for 3 seconds. Repeat the
process to change back to degree Fahrenheit (°F)
USING THE
A
IR CONDITIONER
Controls
Sleep
Fan
Fan
Power Pad
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
Display
Shows the room temperature or time remaining on
the Delay timer. Shows the
Set
temperature while
setting the temperature in
Cool
or
ECO
modes.
The
Set
light will turn on while setting.
Temp In /Decrease – Pads
8VHWRVHWWHPSHUDWXUHZKHQLQ
Cool
or
ECO
mode. The
Set
light will turn on while setting.
Delay Timer In /Decrease – Pads
Each touch of the
In / Decrease –
pads
on the unit or the
In / Decrease –
pads
on the remote control will set the delay time when
using the
Delay 1–24hr
timer. The
Set
light will
turn on while setting.
Fan Speed Pads
8VHWRVHWWKHIDQVSHHGWR
Low, Med, High
or
Auto
on the unit.
NOTE:
On the remote control,
use the fan speed
In / Decrease –
pads
to set the fan speeds to
Low, Med
or
High
8VH
the
Auto
pad to turn
Auto
fan on.
Mode Pad
8VHWRVHWWKHDLUFRQGLWLRQHUWR&RRO(&2RU)DQ
Only mode.
Delay Pads/Delay 1-24hr Pad
Delay ON
—When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF
—When the air conditioner is on, it can
be set to automatically turn off in 1 to 24 hours.
How to set:
Press the Delay 1–24hr pad on the unit or the
Delay pad on the remote control. Each touch of
the
In / Decrease –
pads on the unit or
the
In / Decrease –
pads on the remote
control will set the timer in 1-hour intervals. The
Set
light will turn on while setting.
To review the remaining time on the
Delay 1–24hr
timer, press the
Delay 1–24hr
pad on the unit
RUWKH'HOD\SDGRQWKHUHPRWHFRQWURO8VHWKH
In / Decrease –
pads on the unit or the
In / Decrease –
pads on the remote
control to set a new time if desired.
To cancel the timer, press the
Delay 1–24hr
pad
until the light on the
Delay 1–24hr
pad goes off.
Temp/Delay
Delay
1-24 Hrs
Sleep
Mode
Fan
Power
Auto
High
Med
Low
Cool
Fan
Eco
Set
8
Do Not Operate in Freezing Outdoor Conditions
This cool-only air conditioner was not designed for freezing outdoor conditions. It must not be used in freezing
outdoor conditions.
Summary of Contents for AEB05
Page 16: ...16 49 5000085 Notes NOTES ...
Page 34: ...16 49 5000085 Notas NOTAS ...
