GE 5489329 Technical Publication Download Page 190

Page: 190 / 247

Replacement Procedures

8-16

LOGIQ C9 Series – Basic Service Manual

5482298-100 English Rev. 5

Loading the System Software with USB memory stick/DVD (continued)

4. Press any key to continue when below message displays.

Figure 8-6. Upgrade message

5. Select one of the options for loading the system. Select

choice [a] to load the complete disk.

•

To select [a], the complete disk will be loaded. This
option is recommended for application software
upgrade.

NOTE:

When to select [a] to load complete disk, please ensure
that any patient data on the disk has been backed up.

NOTE:

If you upgrade the software from R1.0.x to R1.1.x, be
sure to select [1] to load the complete disk.

CAUTION

If you select [a], ALL existing software and data will be erased.
If backup has not been performed, all data like Patient
Database, System Configuration and User Configurations
(Customer Presets) will be lost.

Summary of Contents for 5489329
























































































































































































































































Search results

Summary of Contents for 5489329

Reviews:

Related manuals for 5489329

Brands by name

Popular brands

GE 5489329, Technical Publication

Search results

Summary of Contents for 5489329

Reviews:

Related manuals for 5489329

Brands by name

Popular brands