30
• To turn a
GROUP
off, press and release the
CH -
key for less
than one second. The screen will display
OFF
above the
selected
GROUP
.
Removing a Device (Node / Light) From a Group:
This only removes the device from a specific group. The device is
still part of your home control network and the group still exists (if
there were more than one device in it to start).
1. Enter Z-Wave setup mode and highlight
GROUP SETUP
2. Press
OK
; the screen will display
ADD
3. Press the right arrow key once; the screen will display
REMOVE
4. Press
OK
; the screen will display
SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press
SHIFT
and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press
OK
; the letter “W” will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to remove your device.
7. Press the button on the device so it communicates with
the remote.
8. When the screen displays
SUCCESSFUL
you have successfully
removed the Node/Light from the group.
Deleting a Group
This only deletes the specific group. All of the devices are still part
of your home control network.
1. Enter Z-Wave setup mode and highlight
GROUP SETUP
2. Press
OK
; the screen will display
ADD
3. Press the right arrow key twice; the screen will display
DELETE
4. Press
OK
; the screen will display
SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press
SHIFT
and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press
OK
; the screen will display
SUCCESSFUL
to indicate the
group has been deleted.
Scenes
A scene is a single device or group of devices that can be preset to
turn on to a previously specified setting (for example, brightness
level). Scenes are ideal for task or mood lighting. You can set up
a maximum of 18 scenes, containing up to 32 devices per scene.
