GE 45601, Manual, Page: 8 / 20

5.
Press a digit (1-9) for the device location you wish to add. Press
SETUP (SHIFT)
and the digit (1-9) if you are adding devices
10 through 18.
6.
Press
OK
and the screen will display
SETUP WAITING.
7.
Press the button on the device so that it communicates with
the remote.
8.
When the screen displays
SUCCESS
, you have successfully added the
device to the number key and your network.
CONTROLLING INDIVIDUAL LIGHTS (DEVICES / NODES)
You can control a light to turn on or off, or change its brightness level.
The operation of a specific device varies by product. Refer to the manual
for that device to learn its specific operation.
Press and release the
LIGHT
key to put the remote into “Individual
Light Control” mode. The remote will stay in this mode until the
GROUP, SCENE
or
ALL
mode is activated.
Select the light you want to control. (Press and release
SHIFT
to
control lights 10 through 18.)
Turning a Light On or Off:
- To turn a light on, press and release the
ON
key for less than one
second. The screen will display the selected
LIGHT
and
ON
.
- To turn a light off, press and release the
OFF
key for less than one
second. The screen will display the selected
LIGHT
and
OFF.
Setting a Light’s Brightness Level:
- To make a light brighter, press and hold the ON key for more than one
second. The screen will display selected
LIGHT
and
BRIGHT
. The light
will continue to grow brighter until the key is released.
- To make a light dim, press and hold the
OFF
key for more than one
second. The screen will display selected
LIGHT
and
DIM
. The light will
continue to grow dimmer until the key is released.
REMOVING AN INDIVIDUAL DEVICE (LIGHT / NODE)
FROM YOUR REMOTE
This only removes individual number key control. The device is still part
of your home control network and can be controlled through the
GROUP
,
SCENE
and
ALL
commands.
Press and hold
SETUP
until screen displays
LGHT SETUP.
Press
OK
followed by either arrow key to scroll until the display
reads REMOVE .
Press
OK
and the screen will display
SEL DIGIT.
Press a digit (1-9) for the device location you wish to remove. Press
SHIFT
and the digit (1-9) if you are removing devices 10 through 18.
Press
OK
and the screen will display
SUCCESS.
1.
2.
1.
2.
3.
4.
5.