GE 45601, Manual, Page: 13 / 20

NOTE:
The DTS and Time Zone Settings are reserved for future use.
NOTE:
You will need to reprogram the Date and Time when the batteries are replaced.
EVENTS
The 45601 Advanced Remote allows you to program up to 15 automated
events such as turning on or off your lights at a preset time and day. You
must set the time and date before programming an Event.
Adding an EVENT:
Press and hold
SETUP
until the screen displays
LGHT SETUP.
Use either Arrow key to scroll until the display reads
EVENTS.
Press
OK
and the Screen will display
ADD.
Press
OK
and the Screen will display
EVERY DAY
. Use Either Arrow
key to change this option to
MON-FRI, SAT-SUN, ONE TIME
or a
specific Day of the
WEEK
.
Once you have chosen the Event profile, press the
OK
key.
The Screen will now display
SEL DIGIT.
Press any digit and the screen will display the
EVENT
number.
Press and release
OK
and the screen will display
ENABLED.
PRESS OK
and the Screen will display
EVENT TYPE.
Use either arrow key to scroll between the
LIGHT, SCENE
or
GROUP
options (Pressing
DIGITS 1-9
will adjust the
LIGHT
number
accordingly).
After you select the
EVENT
type, press the
OK
key and the screen
will display
ON TIME.
Pressing
ON
or
OFF
with the 1 key will adjust the hour.
Pressing
ON
or
OFF
with the 2 key will adjust the minutes.
Pressing
ON
or
OFF
with the 3 key will toggle between
AM
and
PM.
Press the
OK
key once you have programmed the
ON TIME
and the
screen will display
OFF TIME.
Pressing
ON
or
OFF
with the 1 key will adjust the hour.
Pressing
ON
or
OFF
with the 2 key will adjust the minutes.
Pressing
ON
or
OFF
with the 3 key will toggle between
AM
and
PM.
Once you have programmed the
OFF
time press
OK
and the screen
will display
SUCCESS
.
Random EVENTS:
The 45601 Advanced Remote allows you to program automated events
such as turning on or off your lights at a predetermined time and day. By
choosing the
RANDOM
option, the
EVENT
will start at +/-15 minutes of
the Scheduled Time.
To activate this function, after step 8 above, use either arrow key to scroll
until the display reads
RANDOM
. Press
OK
and the Screen will display
EVENT TYPE
. Continue the programming as shown in step 10 above.
Disabling an EVENT:
Once an event has been programmed, it can be disabled by following
steps 1-8 above and then scrolling to
DISABLED
and pressing OK.
Deleting an EVENT:
Press and hold
SETUP
until the screen displays
LGHT SETUP.
Use either Arrow key to scroll until the display reads
EVENT.
Press
OK
and the Screen will display
ADD.
Use either arrow key to scroll until the screen displays
DELETE.
Press
OK
and the Screen will display
SEL DIGIT
.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
1.
2.
3.
4.
5.