GE 45601, Manual, Page: 17 / 20

UPDATE NETWORK INFORMATION
The Update function is used to request updated network information
from an
SUC
(Static Update Controller). If you do not have an
SUC
in
your network, trying to perform this action will result in a Failure.
To have your remote receive a network update:
Press and hold
SETUP
until the screen displays
LGHT SETUP.
Use either Arrow key to scroll until the display reads
NETWORK.
Press
OK
and the screen will display
RESET.
Use either Arrow key to scroll until the display reads
UPDATE.
Press
OK
and the remote will request an update from your
SUC.
NETWORK-SEND INFO
The send INFO command updates the controller with all available
nodes in the network:
1.
Press and hold
SETUP
until the screen displays
LGHT SETUP
.
2.
Use either Arrow keys to scroll until the display reads
NETWORK
.
3.
Press
OK
and the screen will display
RESET.
4.
Press either arrow key until the screen displays
SEND INFO
.
5.
Press the
OK
key and screen will read
SUCCESS
.
Interoperability with Z-Wave
®
Devices
A Z-Wave
®
network can integrate devices of various classes, and these
devices can be made by different manufacturers. Although every
Z-Wave certified product is designed to work with all other Z-Wave
certified products, your controller must include the appropriate device
classifications in order to control non-lighting Z-wave devices. As
an example, the 45600 basic remote is designed only for controlling
Z-Wave devices using the lighting control classification. The 45601
deluxe remote with LCD readout can control other Z-Wave certified
devices like thermostats as well as lighting.
FCC NOTICE
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off or on,
the user should:
• Relocate or reorient the TV or radio antenna
• Increase the separation between the device and the receiver.
Any changes or modifications to the equipment without JASCO’s ex-
press consent will void the user’s right to operate this equipment.
FCC ID: MG345601
Compliance with IC Rules and Regulations
IC: 6924A-45601
Jasco Products Company
Model: 45601
Object is subject to the following two conditions.
This device may not cause interference, and
This device must accept any interference, including interference that
may cause undesired operation of the device.
1.
2.
3.
4.
5.
1.
2.