80
350 FEEDER PROTECTION SYSTEM – QUICKSTART GUIDE
SOFTWARE SETUP
CHAPTER 3: INTERFACES
4.
Clicking the arrow at the end of the box displays a numerical keypad interface that
allows the user to enter a value within the setpoint range displayed near the top of the
keypad: Click
=
to exit from the keypad and keep the new value. Click on
X
to exit from
the keypad and retain the old value.
5.
For setpoints requiring non-numerical pre-set values (e.g.
3-Phase voltage
connection
below), clicking anywhere within the setpoint value box displays a drop-
down selection menu arrow. Select the desired value from this list.
6.
For setpoints requiring an alphanumeric text string (e.g. "relay name"), the value may
be entered directly within the setpoint value box.
7.
In the
Setpoint > System Setup > Voltage Sensing
dialog box, click on
Save
to save
the values into the 350 . Click
YES
to accept any changes and exit the window. Click
Restore
to retain previous values. Click
Default
to restore Default values.
