background image

Installation

Important Installation Guidelines

•  Avoid sources of noise and heat, such as motors, 

fluorescent lighting, microwave ovens, heating 

appliances and direct sunlight.

•   Avoid areas of excessive dust, moisture and low 

temperature.

•   Avoid other cordless telephones.
•   Never install telephone wiring during a lightning    

 storm.

Digital Security System

Your cordless phone uses a digital security system to 

protect against false ringing, unauthorized access, 

and charges to your phone line.

Telephone Jack Requirements

To use this phone, you need an 

RJ11C type modular telephone 

jack, which might look like the 

one pictured here, installed in 

your home. If you don’t have 

a modular jack, call your local 

phone company to find out 

how to get one installed.

Location

You need to place the base within 6 feet of the AC 

power outlet, telephone jack, and ethernet port.
Make sure it is at least 3 feet away from other 

electrical and metal appliances to avoid interference 

issues.
Your phone works by sending radio signals between 

the handset and base. The strength of the signal 

depends on where you locate the base. Putting it as 

high as possible and separated as much as possible 

from other radio devices and metal objects ensures 

the best signal.

INSTALLATION NOTE

:  

This product operates at 

a frequency of 1.9GHz. to 

provide communication 

with minimal interference 

from other electronic 

devices. To further 

minimize the possibility 

of interference, the base 

of the cordless telephone 

should not be placed 

near or on top of a TV, 

microwave oven, or VCR. 

If interference continues, 

move the cordless 

telephone further away 

from these appliances.

WARNING: Do not 

place your phone in the 

bathroom or other humid 

areas.

Handset Range

The range between the 

base and handset will vary 

greatly depending on the 

location of the base. When 

there is no clear line of 

sight between the base 

and handset the range will 

be reduced.

Range Indicator

The   symbol on your 

handset screen indicates 

when you are in range. 

When you are out of range, 

it flashes.

Modular 

telephone 

line jack

Wall plate

Summary of Contents for 28320EE2 - Dect 6.0 InfoLink 2





















































Reviews: