2
t
elephone
o
perAtion
c
hArGe
/i
n
u
se
i
nDicAtor
The phone is
ON
when the LED indicator on the handset and the CHARGE/IN USE
indicator on the base is lit. The handset and base indicators flash when you receive a call.
s
peAkerphone
o
perAtion
.
NOTE: If you are using the speakerphone, remain close to handset so the party
you are speaking to can hear you.
If you are using the handset and want to switch to the speakerphone, press the
SPEAKER button, press SPEAKER again to end conversation.
If you are using the speakerphone and want to switch to the handset, press the TALK/
CALL BACK button, press TALK/CALL BACK again to end conversation.
m
AkinG
A
c
All
1. Press the TALK/CALL BACK or SPEAKER button. Dial the desired number.
- OR -
Dial the number first, then press the TALK/CALL BACK or SPEAKER button.
- OR -
Press the CALLER ID-VOLUME (
6
or
5
) button to select the desired record, then
press the TALK/CALL BACK or SPEAKER button
2. When finished, press the TALK/CALL BACK button to hang up.
NOTE: You may enter up to 32 pre-dial digits.
NOTE: If you want to delete the pre-dial number you entered, press the DELETE
button until all of the digits are erased.
A
nswerinG
c
Alls
1. When the phone rings, press the SPEAKER button on the handset
- OR -
pick up the handset and press the TALK/CALL BACK button.
2. When finished, press SPEAKER or TALK/CALL BACK to hang up.
NOTE: Adjust the handset volume by pressing the CALLER ID-VOLUME (
6
or
5
)
button during a call.
