GE 28031xx2 Page 40 User Manual Download

Page: 40 / 54

nstructions

ptionAl

DDitionAl

AnDset

(

)

This phone is EXPANDABLE up to a total of 4 handsets (by additional purchase of the

optional Model 28001 handset with charge cradle).

If you have purchased an extra handset apart from your original purchased

unit you may find a detailed description of its functions in the Instruction

Booklet provided with your original purchased unit.
If you have purchased an extra handset that is not of the same type as your

original handset you may still use the original User’s Guide to help explain

the new handsets basic functions and options. (These handset options are

accessed by either pressing the menu or phone book button on the handset.)

Arts

hecklist

Make sure your package includes the items shown here.

Base

Handset

Belt

clip

Handset

battery pack

Battery compartment

cover

nstAllinG

the

AnDset

AtterY

NOTE: You must connect the handset battery before use.

CAUTION: To reduce the risk of fire or personal injury, use only the

ATLINKS USA, Inc.

Nickel-metal Hydride

battery model 5-

xxxx

, which is

compatible with this unit.

1. Locate battery and battery door which are packaged together inside a plastic bag

and are separate from the handset.

2. Locate the battery compartment on the back of the handset.
3. Plug the battery pack cord into the jack inside the compartment.

NOTE: To ensure proper battery installation, the connector is keyed and can

be inserted only one way.

4. Insert the battery pack.
5. Close the battery compartment by pushing the door up until it snaps into place.

Summary of Contents for 28031xx2























































Search results

Summary of Contents for 28031xx2

Reviews:

Related manuals for 28031xx2

Brands by name

Popular brands

GE 28031xx2, User Manual

Search results

Summary of Contents for 28031xx2

Reviews:

Related manuals for 28031xx2

Brands by name

Popular brands