VSR-4
User Manual
64
Figure 72. The ethernet settings menu
An ethernet connection can be used to connect to the unit from a PC for the viewing of live or recorded images.
Use this menu to configure the Ethernet communications settings. Select from the following:
•
Ethernet:
Select Enable or Disable.
•
DHCP:
Select Enable or Disable. Enables dynamic IP addressing. When DHCP is enabled, the IP
address, Subnet Mask, Gateway, and Server fields are dynamically addressed.
•
Name Service:
Select from Disable, WINS or GnuDIP. Enabling WINS registers the hostname and IP
address within the current Network. This ensures that you can connect to the VSR-4 by hostname
within the network. See
x
for information on configuring Dynamic DDS with GnuDIP.
•
IP Address / Subnet Mask / Gateway:
Consult with a qualified Network Administrator or an MIS
professional to configure these settings if DHCP is not enabled.
•
Primary Name Server / Backup Name Server:
The IP addresses of the Primary and Backup Name
Servers. Not required if DHCP is enabled.
•
HTTP Port:
Select the HTTP Port. Select from Port 0 to 65535. Shortcuts are available for port 80
(Camera 1 button) and 8080 (camera 2 button). Consult with a qualified Network Administrator or an
MIS professional to configure these settings.
•
Hostname:
The default Hostname is the unit’s serial number without the dashes. The user should
modify only when GnuDIP is selected in the Name Service field.
•
DDNS Update Time:
Select the Dynamic Domain Name Server interval. Select from Disable or from
1 to 1440 minutes.
Summary of Contents for VSR-4
Page 1: ...GE Security VSR 4 User Manual ...
Page 6: ...VSR 4 User Manual vi ...
