GE Security VSR-4, User Manual

Page: 56 / 84

VSR-4
User Manual
50
6. Use the Arrow buttons to enter the time the recording will end. Entering a time "before" the start time
will cause the unit to record until the indicated stop time on the next day. When finished entering the
stop time, use the
Arrow buttons to navigate to the
SPD
setting.
7. Use the Arrow buttons to enter the record speed in pictures per second (60, 30, 20, 15, 10, or 5
seconds).
8. When finished entering the Record Speed, use the Arrow buttons to navigate to the
QUALITY
setting.
9. Use the Arrow buttons to enter the record quality (Low, Medium, or High). Higher record quality
settings use more disk space.
10. When finished entering the Record Quality, use the Arrow buttons to navigate to the
ON/OFF
setting.
11. Use the Arrow buttons to Activate, Deactivate, or Delete the recording.
12. When finished, click the Enter button to exit the Edit mode. Use the Arrow buttons / Arrow buttons
to navigate to
[OK]
, then click the Enter button to complete the selection.
Editing a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the event parameter you wish to edit.
2. click the Enter button to enter the Edit mode.
EDIT MODE
will appear on-screen, in the lower left-
hand corner of the pop-up menu.
3. Use the Arrow buttons to change the values. Use the Arrow buttons to navigate among parameters
in the same row.
4. When finished, click the Enter button to exit the Edit mode. Use the Arrow buttons to navigate to
[OK]
, then click the Enter button to complete the selection.
Deleting a Timed Recording:
1. Using the Arrow buttons to navigate, highlight the
ON/OFF
parameter of the event you wish to
delete.
2. click the Enter button to enter the Edit mode.
3. Use the Arrow buttons to select
DEL
from the menu.
4. click the Enter button to confirm the selection and exit the Edit mode.
5. Use the Arrow buttons to navigate to
[OK]
, then click the Enter button to remove the selection and
exit the menu.