manualshive.com logo in svg

GE Security VSR-4, User Manual

Share
Download
GE Security VSR-4 User Manual Download Page 50

VSR-4

User Manual

44

Main Menu 

/

 Alarms 

/ 

Input Configuration

Figure 41. The input configuration menu

Configure the alarm inputs as either Normally Open or Normally Closed. Configure as follows.

•

Normally Open Zero Potential Relay Contact:

  Configure in menu as Normally Open.

•

Normally Closed Zero Potential Relay Contact:

  Configure in menu as Normally Closed

•

TTL Active High:

  Configure in menu as Normally Closed.

•

TTL Active Low:

  Configure in menu as Normally Open.

•

Open Collector Active On:

  Configure in menu as Normally Open.

•

Open Collector Active Off:

  Configure in menu as Normally Closed.

Main Menu 

/

 Alarms 

/

 Alarm Latch

Figure 42. The alarm latch menu

This feature determines how the unit latches alarm conditions.

Select from the following options:

Latched:

  The alarm is activated until it is silenced and acknowledged by the user.

Transparent:

  The alarm is active only while receiving alarm input. The alarm condition is canceled when the 

alarm input ceases.

Timed Out:

  The alarm condition is latched for the amount of time selected in this menu, then it is 

automatically silenced and acknowledged.  If the alarm input exceeds the duration specified in this menu, the 
unit silences and acknowledges the alarm when the alarm input ceases.  Select the timeout duration, the range 
is from 1 to 250 seconds.

Transparent alarms cannot be silenced and acknowledged.  If transparent mode is preferred, but the ability to 
silence and acknowledge alarms is desired, select Timed Out and set the Alarm Timeout to two seconds.

Summary of Contents for VSR-4





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands