FASD700 aspirated smoke detector – Installation manual
6
2.2 Detector installation
Up to two detectors may be installed.
For the FASD710 / FASD712 panels conventional or analogue addressable detectors
may be used (not supplied).
For the FASD715 / FASD717 panels laser detectors are supplied.
2.2.1 Connecting detectors
To connect the detector(s):
1.
Remove the panel front cover.
2.
Connect the loop terminals of the detector(s) to the 2-way connector block(s) on the
inner panel (see Figure 3: Panel detector connection).
Figure 3: Panel detector connection
2.2.2 Configuration for analogue addressable detectors (FASD710 / FASD712)
A flow fault is reported as a device fault on detector 1.
Figure 4: FASD710 / FASD712 analogue addressable detector connection
1.
To 24 VDC power supply
2.
Loop in to fire panel
3.
Loop out to fire panel
4.
Relay contact
5.
To detector 1
6.
To detector 2
WWW.UKPANELS.COM
Summary of Contents for FASD700
Page 16: ... 1052955 WWW UKPANELS COM ...
