GE Security DIGIA II -, User Manual

Page: 12 / 46

Digia II
User Manual
4
Monitor display
Figure 3 shows the Digia II monitor display.
Figure 3. Digia II monitor display
C
Monitor output BNC. Connect this to a monitor to view Digia II output.
D
SVGA connector. Connect a computer monitor to view a Digia II output.
E
Ethernet port. Use an Ethernet cable to connect Digia II to a computer network.
F
Alarm output connections. Connect to apprpopriate devices (siren, buzzer, etc.).
G
Alarm input connections. Connect alarms here.
H
Audio in/out. Connect speakers and/or microphone here.
I
19 VDC power connector. Connect the power source here.
A
Channel tag. Indicates the channel name.
B
Event signal. Small icons indicate certain events for each channel. There are four different signals:
• A - An alarm event has taken place where this camera is located.
• M - A motion event has taken place where this camera is located.
• V - The video feed from this specific location has been lost.
• F - The fan in the unit is malfunctioning.
• H - The hard drive is malfunctioning.
CH01
12-19-2006 TUE R01 01% FAN 10:39:32a
M
11-28-2006 TUE P01 01% x2 FAN 10:39:32a
A
B
C
D