13
When you use a DHCP server, you can display the IP address assigned to the camera by clicking the
Refresh
button of the Easy IP Setup software.
3. Complete each network setup item and click
Apply
(
Figure 14
).
When you use a DHCP server, it is possible to set
DNS
to
AUTO
.
Figure 14. IP settings
It may take about 30 seconds to complete the settings upload to the camera. The settings may be invalidated if
the AC adapter or the LAN cable is disconnected before completing the upload. If this happens, configure the
settings again.
When using a firewall (including software), allow access to all UDP ports.
