9
Connection examples
Figure 10
shows an example of a direct PC connection. For this connection, use a LAN cable (CAT5, cross).
Plug the AC adapter (12 VDC/24 VAC power supply) into a 120 VAC outlet.
Figure 10. PC direct connection example
Figure 11
shows an example of a connection to a network using a PoE device (hub). For this connection use
LAN cables (CAT5, straight) and use a switching hub or router that is compliant with 10Base-T/100Base-TX.
Figure 11. PoE connection example
A power supply is required for each network camera. When you use a PoE device, a 24 VAC/12 VDC power
supply is not necessary.
The monitor-out connector is provided only to check the angular field-of-view adjustment on the video
monitor when you install the camera, or for servicing. Do not use it for recording or monitoring.
LOCK
AC adapter
Camera
PC
LAN cable (CAT5, cross)
LOCK
LOCK
Video monitor for
setup adjustments
Video monitor for
setup adjustments
PC
Switching hub or router
PoE device
Camera
Camera
LAN cable
(CAT5, straight)
LAN cable
(CAT5, straight)
LAN cable
(CAT5, straight)
