CamPlus 2 Traditional Box IP Camera
Installation Manual
6
Camera installation
Follow these general installation guidelines:
•
Install the camera indoors. The camera is not meant for outdoor use.
•
Do not install the camera in direct heat or in areas of high humidity. Install the camera in an
environment where the temperature stays within 41 to 95°F (5 to 35°C) and the humidity stays below
90% (when the power is on).
•
Do not block any ventilation openings.
•
Keep the power cords away from obstacles. Do not walk on or pinch the power cords, especially at the
plugs, convenience receptacles, or near the exit point.
•
Only use accessories specified by the manufacturer.
•
Do not use near strong electric (TV/radio antenna) or magnetic fields (near a motor or a transformer),
since audio and video distortion can occur.
Before you start the installation, prepare the required devices and cables, and disconnect the AC adapters from
the outlet to ensure there is no power to the unit.
To install and connect the camera, do the following:
1. Fix an optional camera mount base onto the camera and mount the camera on it (
Figure 5
). Use the
screws you removed to securely attach the camera mount base.
Figure 5. Attach optional camera mount base
Your installation hardware depends on your mounting material. For steel, fix with bolts and nuts (M6
or M8). For concrete, fix with anchor bolts (M6 or M8). Do not use wood screws to fix the camera
mounting bracket (optional) since they cannot support the combined weight of the camera and bracket.
Tripod mount base
Fixing screws
