Page 42
LOC
PG
DESCRIPTION
DEFAULT
DATA
Segment #5 (Circle numbers to program)
L
37
21
1
2
3
4
5
6
7
8
Lost Clock service LED enable.
Zone Doubling enable.
Disable on-board eight zones.
Enables two trips on the same cross-zone to activate the alarm.
Disables bypass reports for force armed zones
Silent exit.
Clock uses internal crystal.
Disable Temporal Siren on Fire (Do not disable on UL listed systems)
L
38
21
SWINGER SHUTDOWN COUNT
0
_
KEYPAD SOUNDER CONTROL
Segment #1 (Circle numbers to program)
L
39
21
1
2
3
4
5
6
7
8
Keypad sounds for Telephone Line Cut when in the Armed state.
Keypad sounds for Telephone Line Cut when in the Disarmed state.
Keypad sounds upon AC Power Failure.
Keypad sounds upon Low Battery Detection.
Keypad sounds during Cross Zone Trip Time.
Keypad sounds for Tamper Alarm.
Reserved.
Keypad sounds for expander trouble (required for UL).
SYSTEM TIMERS
Segment #1 Dynamic Battery Test duration (0-255 minutes)
0
_
Segment #2 AC Failure report delay (0-255 minutes)
5
_
Segment #3 Power Up Delay (0-60 seconds)
0
_
Segment #4 Siren Time (1-255 minutes)
8
_
Segment #5 Telephone Line Cut delay (0-255 seconds)
0
_
Segment #6
Cross Zone Time (0-255 minutes)
5
_
Segment #7
Chime Time in 50 mS increments (0-255)
3
_
Segment #8
Dialer delay ( 0-255 seconds)
0
_
Segment #9
Fire Alarm Verification Time (120-255 sec.)
0
_
L
40
22
Segment #10 Listen-In Time (0-255 seconds)
0
_
SPECIAL FEATURES
Segment #1 (Circle numbers to program)
41
22
1
2
3
4
5
6
7
8
Enables six digit code option. All arm/disarm/Go To Program codes require six digits
Requires valid user code entry for [
r
]-[9]-[8] and [
r
]-[9]-[9] functions to work.
Enable Auto Cancel / Abort.
Enable Walk-Test Mode.
Reserved.
Reserved.
Reserved.
Reserved.
L
42
22
GO TO PROGRAM CODE
9-7-1-3-0-0
_ _ _ _ _ _
