CyberScout User Manual
Installing the CyberScout
1038864A / December 2002
25
2.7
SETTING THE SITE ADDRESS DIP SWITCH
CyberScout contains a multi-position DIP switch. You can access the
DIP switch without removing the camera shroud. The first 10 positions of
the switch are used to assign the CyberScout a site address in the
Digiplex system.
To enter the receiver’s site address on the DIP switch:
1)
Locate the DIP switch. It protrudes through the side of the camera
shroud.
Housing
DIP switch
Test video output connector
Camera shroud
Figure 24. DIP switch location
2)
Determine which position values must be added together to equal
the site number. See examples below for details about setting
address switches.
3)
Set the switches that correspond to those values in the ON position.
