CyberScout User Manual
Installing the CyberScout
1038864A / December 2002
23
2.5.3 S
URFACE
-M
OUNT
A
DAPTER
See Figure 22 and Figure 23 and perform the following:
1)
Plug the RJ45 interconnect
cable into the top of the
pan/tilt assembly.
2)
Carefully place the
interface module and its
connected cabling into the
surface-mount adapter
while raising the pan/tilt
assembly.
3)
Align the pan/tilt assembly
with the adapter so that the
camera’s orientation marks
( ) face toward the
desired pan arc. The
marks are located on the
pan/tilt raceway.
4)
Place the pan/tilt assembly
in the surface-mount
adapter and secure it with
three self-tapping screws
(provided).
Note:
Before tightening the
screws, make sure that all three
are engaged in the adapter’s
channel.
Figure 22. Securing the pan/tilt assembly
Figure 23. Engage all three screws into the
adapter’s channels
