– 10 –
About TurboCool
TM
Note:
On dispenser models, the refrigerator temperature
•
can be changed during TurboCool, but when
attempting to change refrigerator temperature with
TurboCool on, the LED will go out and TurboCool will
be cancelled.
The freezer temperature is not affected and can be
•
changed during TurboCool.
When opening the refrigerator door during
•
TurboCool, the fans will continue to run if they have
cycled on.
How to Use
Press the
TurboCool
pad. TurboCool activated will be
indicated by an illuminated LED next to the pad. The
status bar section of the LCD will indicate TurboCool ON.
The displayed refrigerator temperature will be replaced
with TurboCool.
How it Works
TurboCool™
rapidly cools the refrigerator compartment
in order to more quickly cool foods. Use TurboCool
when adding a large amount of food to the refrigerator
compartment, putting away foods after they have been
sitting out at room temperature or when putting away
warm leftovers. It can also be used if the refrigerator has
been without power for an extended period.
Once activated, the compressor will turn on immediately
and the fans will cycle on and off at high speed as
needed for eight hours. The compressor will continue
to run until the refrigerator compartment cools to
approximately 34°F (1°C), then it will cycle on and off
to maintain this setting. After 8 hours, or if TurboCool is
pressed again, the refrigerator compartment will return
to the original setting.
TurboCool LED
