3
Product Installation/Removal
1. Insert the micro-SD card based on the position shown on the gimbal.
2. Press the payload unlocking button to remove the protective cover.
3. Align the red point on the payload interface and insert the gimbal into the installation position.
4. Rotate it by 90° based on the direction shown on the casing to lock it.
5. Press the payload mount adaptor button, and rotate the gimbal by 90 ° based on the direction
shown on the casing to remove it.
•
If the gimbal cannot be mounted, please check whether the aircraft’s interface has been
accidentally rotated. Before removing the gimbal camera, please press its unlocking button,
and rotate it anticlockwise to remove the gimbal camera.
•
The gimbal’s protective cover can protect the gimbal camera’s interface during transportation.
Before use, make sure that it has been removed; when the gimbal is not in use, mount it to
protect the gimbal camera.
• During gimbal self-checking, do not move the aircraft.
•
The gimbal camera models shown in the figure are only for purposes of illustration.
•
It is required that the aircraft be powered off before mounting the gimbal.
•
Please power off the aircraft before inserting or removing a micro-SD card
Summary of Contents for PVL-8K
