12
1
=
=
Whilst the door is on the floor,
rotate the axle back and forwards
through the roll to centre it
Position the
door ready
for fitting with
the bottom
rail facing the
opening
The Axel will protrude 11” (280mm)
beyond the drum wheel at each side
Position and mount the door
3
2
2
3
Check axle length does not foul any
obstructions. Cut down if necessary
ensuring the axle is even and centred.
Lift the complete door curtain and axle
onto the brackets ensuring that the
roll is the correct way round with the
bottom rail as shown below.
Fit saddle and ‘U’ bolt, nut and
washers loosely at each support
bracket. See figure 1 for the location
of Standard (main slot) and figure 2
for Mini doors (small and main slot)
Bottom rail start
position
A minimum of two people must be
available for fitting. However due to the
weight and spring tension of larger doors,
we insist that three people be available for
installation
on doors over 10ft wide
or 9ft high.
!
!
!
!
!
!
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk
www.samsondoors.co.uk
0800 328 6250
www.samsondoors.co.uk