GDS Compuprint 10300 User Manual Download

Page: 96 / 128

User Manual 9050/9050plus

78413010-003 94

TEAR NORMAL

Pressing the TEAR key the paper is moved to the tear-off position.

Pressing again the TEAR key to exit from the tear-off mode, the paper is moved to the
printing position.

TEAR AUTOMATIC If the printer is not receiving data, the paper is moved automatically to the tear position.

LABEL

The TEAR key is disabled for the tear-off function. This selection is useful

when printing on labels. Pressing the PARK key, the printer ejects the paper
toward the back of the printer.

TEAR NO

The tear-off function is disabled.

5. Press the PROGRAM key to exit the setup.

How to Lock/Unlock the Printer Setups

To prevent not expertise persons changing the printer setup parameters, it is possible to lock/unlock the access to the
printer setups as follows:



Press

ON LINE, MACRO and TEAR keys at the same time and keep them pressed while

powering the printer on until the display shows RELEASE KEYS message. As soon as these keys are
released, the following messages will be displayed:

STARTING

then

9050plus (9050) Ver. Xx.x

then LOCKED

Now the access to the printer setups is locked. If the PROGRAM key is pressed, the LOCKED MENU
message is displayed (the PROGRAM key is disabled).



If you decide to unlock the printer setup, turn the printer off, then press the ON LINE, MACRO and TEAR

keys at the same time and keep them pressed while powering the printer on again until the display
shows RELEASE KEYS message. As soon as these keys are released, the following messages
will be displayed:

STARTING

then

9050plus (9050) Ver. Xx.x

then UNLOCKED

Summary of Contents for Compuprint 10300

































































































































Search results

Summary of Contents for Compuprint 10300

Reviews:

Related manuals for Compuprint 10300

Brands by name

Popular brands

GDS Compuprint 10300, User Manual

Search results

Summary of Contents for Compuprint 10300

Reviews:

Related manuals for Compuprint 10300

Brands by name

Popular brands