User Manual 9050/9050plus
78413010-003 32
See the IP Address value set in the parameter of the LAN INTERFACE item in the Power-On
Configuration setup.
Setting up Printing for ASII Files
The next step in configuring the AS/400 is to setup the remote printing capability.
There are two ways to do this:
1. You can specify the LPR parameters Manually each time you senda file to the printer
2. Use remote writer and a remote output queue for automatic printing to the printer
Tu Use LPR Manually
1. Start TCP/IP, if it not already running, by entering the STRTCP command
2. At the AS/400 command line, enter 'LPR'.
3. The following example shows only the parameters you need to specify:
Remote System
RMTSYS
INTNETADR
Printer
Queue
RTQ
d1prn
Destination Type
DESTTYP
OTHER
Transform SCS to ASCII
TRANSFORM
YES
Manufacturer Type and Model
MFRTYPMDL IBM6400EP
Internet Address
INTNETADR 127.000.000.000
where:
Remote System: enter the host name of your printer or INTNETADR, whic then prompts you to specify the
IP address of your printer.
Printer Queue: set to “pr1” through “pr4”. The remote printer queue name must be all lower case, entered in
single quotes.
Destination Type: specify “OTHER” for the DESTTYP parameter.
Transform: specify “YES”.
Manufacturer Type and Model: select a manufacturer type and model. Select “IBM6400EP” for Epson
emulation or “IBM6400" or "IBM42023" for IBM Proprinter.
Internet Address: specify the IP address of the printer.
To Create an Automatic Remote Output Queue
1. From the AS/400 command line, enter CRTOUTQ.
2. The following example shows only the parameters you need to specify:
Output Queue
OUTQ
USERNAME
Remote
system
RMTSYS
INTNETADR
Remote printer queue
RMTPRTQ
d1prn
Writer to Autostart
AUTOSRTWTR
1
Connection type
CNNTYP
IP
Destination type
DESTTYP
XAUTOQXAIX
Transform
TRANSFORM
YES
Manufacturer type
MFRTYPMDL
IBM6400EP
Internet
Address
INTNETADR
127.000.000
