User Manual 9050/9050plus
78413010-003 81
Selecting Another Macro
MACRO -> MFG NO
↑
NEXT MACRO? NO
→
or
←
NEXT MACRO? YES
↓
↓
CONFIG MENU NO
MACRO#1
To pass over to another macro, select NEXT MACRO YES. Pressing the
↓
or
↑
key the item MACRO#1 is displayed,
then press the
→
key to pass over to MACRO#2 (MACRO CHANGING is displayed).
When passing over from one macro to another, the fanfold paper loaded from the paper
path, selected in the previous macro, will be automatically parked (TEAR IF NECESS/PARK
PAPER is displayed). Tear off this fanfold paper and press PARK key
You can now set the parameters for MACRO#2 as described above. In this way you prepare the second printing
environment. Passing over from one macro to the other then sets two different printing environments.
Passing over to the Power-On Configuration
At this point of the setup, it is possible to pass over to the
Power On Configuration
functions setting.
See the specific chapter for detailed item.
NEXT MACRO NO
↑
CONFIG MENU NO
→
or
CONFIG MENU YES
↓
↓
HEX DUMP NO
EMUL. OPTIONS
These items are self-explaining.
