7
GDS
ALLIGATOR Safety // Sources of error
To note:
•
The ALLIGATOR series (chuck) was designed for loading and changing rotationally symmetrical
blanks and tools with shank tolerance h6 or more accurate.
•
For shank tools, all shanks according to DIN 1835 Form A, B, E or DIN 6535 Form HA, HB, HE
can be clamped.
•
The ALLIGATOR series (chucks and intermediate sleeves) may only be used within the scope of
their technical data.
•
This product is intended for industrial use.
•
Intended use includes compliance with all the information in this manual.
•
Flawless function, as well as warranty claims, can only be guaranteed with original GDS acces-
sories.
GDS
ALLIGATOR Safety Instructions
GDS
ALLIGATOR error causes and solutions
Check the following points:
•
Check clamping pressure
•
Check blank
•
Contamination
•
Locking mechanism (blue ring) correctly closed
•
All mounting screws correctly tightened
•
Chuck requires room temperature
•
Open everything again, clean and start again step by step