95/TX Operation & Maintenance Manual, Revision 1.0
Page 20
6
TROUBLESHOOTING GUIDE
DISPLAY SCREEN SHOWS “NO SERVER FOUND”
•
95/TX located too far from beacon server; move closer
•
95/TX network ID not set to match network ID of primary beacon server; match Network IDs
•
95/TX antenna or antenna cable broken or damaged; repair or replace
•
Radio type incorrect (using 900 MHz radio in 2.4 GHz network or vice-versa)
IN-RANGE ICON SHOWS DOTTED LINE
•
Beacon server signal lost and regained; check communications
EVENT LOG SHOWS SINGLE CHANNEL IN COMM ERROR
•
GASMAX/TX battery dead; replace battery
•
GASMAX/TX too far from beacon server or too far from 95/TX; move closer
EVENT LOG SHOWS ALL CHANNELS IN COMM ERROR
•
Network ID set incorrectly; check Network ID
•
Beacon server unavailable; check device designated as beacon server
•
Lightning strike on antenna or in vicinity; replace radio
CHANNEL SHOWS CONFIG PENDING
•
This is normal – config data is broadcast by each GASMAX on 8 hour intervals. If condition
persists for more than 24 hours, check GASMAX/TX Wakeup Timer setting.
DISPLAY SCREEN BLANK
•
DC power failed or too low
•
AC power unavailable or AC power supply failure
