95/TX Operation & Maintenance Manual, Revision 1.0
Page 13
POWER AND SIGNAL WIRING
DC POWER
When using a source of 24VDC, the power and ground connections are made to the right-hand side
terminal block (TB1) on the 95/TX I/O power supply board located in the back of the enclosure.
Figure 4-1: DC Power Input Wiring
AC POWER
When using a source of AC power, the line, neutral and earth ground connections are made to AC power
supply located in the left-hand side enclosure. A cable gland is provided to run the power wiring out the
lower left side enclosure opening.
Figure 4-2: AC Power Input Wiring
-
+12-30 VDC Input
TB1
Line
Neutral
Ground
