GDC SX-2000A Series User Manual Download Page 95

Page: 95 / 185

- 95 -

SX-2000A Series with Integrated Media Block/SX-2001A Series

User Manual

4. CONTENT MANAGER

April 22, 2014

4. CONTENT MANAGER

4.1. About the Content Manager

4.1.1. Introduction

The SX-2000/SX-2001 Content Manager allows the user to manage the contents of the server to:

4.1.2. Accessing the Content Manager

Figure 60 Manage Content Button.

Download content from a disk or source on the network.

Download keys [KDM

’s] required for playing back content from disk or source on the network.

Delete content that exists on the server.

Check that the content that is already on the server is fine and the files are complete and

proper.

Summary of Contents for SX-2000A Series


























































































































































































Search results

Summary of Contents for SX-2000A Series

Reviews:

Related manuals for SX-2000A Series

Brands by name

Popular brands

GDC SX-2000A Series, User Manual

Search results

Summary of Contents for SX-2000A Series

Reviews:

Related manuals for SX-2000A Series

Brands by name

Popular brands