- 36 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13.3. Automation setup for eCNA devices
The SR-1000 supports the eCNA-10 automation system. Follow the steps below to configure
an eCNA device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, click on the
Create
button.
3. Select
‘
eCNA_IO
’
as the device
Type
. Enter the
Name
of the eCNA device and click
OK
.
4. Enter the
IP Address
of the eCNA device.
5. The eCNA device has many cues available for automation. These cues can be enabled or
disabled by selecting them in the
Server events
,
eCNA controls
,
eCNA status
and
eCNA
event report
fields. All cues are disabled by default.
6. Click
Save
to save the settings.
Figure 39: eCNA device setting
