- 35 -
December 22
nd
, 2022
GDC SR-1000 STANDALONE INTEGRATED MEDIA BLOCK
™
INSTALLATION MANUAL
13. AUTOMATION SETUP
13.2. Automation setup for Projectors
The SR-1000 supports automation for Barco, Christie and NEC projectors. Follow the steps
below to configure a projector device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
sub-tab.
2. Under the
Device
list on the left, click on the
Create
button.
3. Select
‘
PROJECTOR
’
as the device
Type
. Enter the
Name
of the projector and click
OK
.
4. Enter the
IP Address
of the projector device
5. Set the correct
Model
of the projector. The
Port
number will automatically change to the
default automation port number for the model. If the projector is a
Series 2
projector, check
the ‘Series 2’ checkbox.
6. Enter
Login
and
Password
for the projector, if required.
7. Click
Save
to save the settings.
Figure 38: Projector setting
