- 35 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
13. AUTOMATION SETUP
12.5. Automation setup for Christie ACT devices
The SR-1000 supports the Christie ACT automation device. Follow the steps below to configure a
Christie ACT device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
subtab.
2. On the left column, click
Create.
3. Select
ChristieACT
as the
device type
. Enter the
name
of the ChristieACT device, and
click
OK
.
4. Enter the
IP address
of the ChristieACT device.
5. The default setting for
Port
is displayed on the settings for the ChristieACT device.
Change this value if required.
6.
Default control cues
will be set up for a new ChristieACT automation device. Control
cues can be added or removed by clicking the
+ or
–
buttons.
7. Click
Save
to save the settings.
Figure 40 Christie device setting
