- 24 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
8. SERIES 2 PROJECTOR SETUP
7.5. 3D settings for Series 2 projectors
The 3D macros for Series 2 projectors should be configured with the following settings for
“3D
Input Control
”:
•
3D Sync Input Mode: Use ‘Line Interleave’ (first line=Left, second line=Right)
•
L/R Display Reference: Not Used
•
Frame Rate: 6:2
•
L/R Display Sequence: Left (L1R1 L2R2)
The following shows 3D settings on a Christie projector as an example (see Figure 26).
Figure 26 3D macro settings for Christie Series 2 projectors.
The settings for 3D output control (
‘3D Sync Polarity’, ‘Dark Time’, ‘Output Delay’ and ‘Phase
Delay’) should be customized according to the type of 3D system used (RealD, XpanD or
Dolby3D).
