- 10 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
2.INSTALLING SR-1000 INTO THE PROJECTOR
2.1.2.
Christie Projector Placement
Figure 5 shows the location where the SR-1000 should be installed on a Christie projector.
Remove any existing interface boards or placeholder faceplates from this position before
installing the SR-1000.
Figure 5 SR-1000 Placement on Christie projector.
2.1.3.
NEC Projector Placement
Figure 6 shows the location where the SR-1000 should be installed on a NEC projector. Remove
any existing interface boards or placeholder faceplates from this position before installing the SR-
1000.
Figure 6 SR-1000 Placement on NEC projector.
Note
: When installing the SR-1000 into any NEC projector, it is recommended to install it into the
top slot of the projector. If the SR-1000 is installed into the bottom slot, the board runs the risk of
coming in contact with the IMB enclosure.
Please refer to the projector manuals for more details on preparing the projector for SR-1000
installation.
