- 32 -
March 15, 2018
Installation Manual for SR-1000 Standalone
Integrated Media Block™
13. AUTOMATION SETUP
12.2. Automation setup for projectors
The SR-1000 supports automation for Barco, Christie and NEC projectors. Follow the steps
below to configure a projector device in the server automation interface.
1. Under the
Automation
tab in the menu, click the
Device
subtab.
2. On the left column, click
Create.
3. Select
PROJECTOR
as the
device type
. Enter the
name
of the projector, and click
OK
.
4. Enter the
IP address
of the projector device
5. Set the correct
model
of the projector. The
port
number will automatically change to the
default automation port number for the model. If the projector is a
Series 2
projector,
check the ‘Series 2’ checkbox.
6. Enter
Login and Password
for the projector if required.
7. Click
Save
to save the settings.
Figure 37 Projector setting
