Initial configuration of the network settings
RemoteAccess-CPU series ·
19
English
5. Enter the following values under
Interface A
:
Configuring global network settings
Global network settings ensure that the web application is accessible from all sub-
networks, even in complex networks.
How to configure global network settings:
1. Select the section
Global settings
.
2. Enter the following values:
3. Click on
Save
.
Operating mode:
Select the operating mode of
Interface A
:
Off:
Static:
A static IP address is assigned.
DHCP:
Obtain IP address from a DHCP server.
IP address:
Only if the Static operating mode is selected, enter the IP
address of the interface.
Netmask
Only if the Static operating mode is selected, enter the net-
mask of the network.
Operating mode:
Enter the desired operating mode:
Static:
Use of static settings.
DHCP:
Obtain settings from a DHCP server.
Hostname:
Enter the hostname of the device.
Domain:
Enter the domain to which the device should belong.
Gateway:
Enter the IP address of the gateway.
DNS server 1:
Enter the IP address of the DNS server.
DNS server 2:
Optionally
, enter the IP address of another DNS server.
In the
DHCP
operating mode the following settings are obtained automati-
cally. Making entries is not possible.
